Pm and Cabinet

In: Other Topics

Submitted By swilly29
Words 3396
Pages 14
08
Fall
How governments are formed

There are no codified rules in the UK to state how government is formed, in theory it is in the hands of the monarch – up until the 19thCentury this was largely a reality. However the monarch no longer plays any active role in this process. The party that wins a majority of seats in the House of Commons after a general election, its leader will be invited by the monarch to form a government.

2010 Coalition

* Conservatives were longest party in HoC but failed to win overall majority * Labour negotiated a coalition with LibDems and later the LibDems negotiated with both main parties for a coalition * Labour and LibDem did not make an overall majority * Gordon Brown later resigned and advised the Queen to ask Cameron to form a government either as a minority or in coalition with LibDems. * Cameron accepted and formed coalition with LibDem

‘The Government’

25 members are members of the HoL and 90 are MPs. MPs that are from the party that is in government ate not members of government! They are known as backbenchers and the members of government are known as frontbenchers. All members of government are appointed by the PM. The cabinet (22-23 members) meet regularly.

Ministerial selection

The PM must weigh up the qualities of individuals against the political consequences of appointing them.

Qualities that ideal ministers should possess: * Must be politically reliable * Must have potential * Should share their views * Managerial skills needed
Under coalition * How many cabinet posts do they have each? * Must discuss whom to elect together

Other forms of government

* Minority government – party forms a government without a parliamentary majority. Can never rely on getting legislation/financial budgets passed. It must therefore try to build a coalition of…...

Similar Documents

Pm Questions

...you give us an example of this scenario?” “What type of development process, code, and tools have you worked with?” (This is industry-specific. The tools, processes, and technologies will vary, but this type of “drill-down” question will be asked.) “What are your short-term (1 year) and long term (5 years) goals?”  In addition to the questions above, which are for the most part company agnostic, I also prepare answers for these two questions that are specific to the job and company for which I’m interviewing, since these are ALWAYS asked: “What interests you about this job and company?  “What qualifies you for this job?”  That’s my list! If you’d like to see the original post and comments they were posted in a couple other PM groups: WHAT OTHER COMMON PROJECT MANAGEMENT INTERVIEW QUESTIONS HAVE YOU HEARD? If you have additional questions, or updates to the questions above, please post them here. Let’s help each other prepare for the next time one of us is headed off to a new job interview....

Words: 437 - Pages: 2

Southern Cabinet Case

...Universidad de Puerto Rico Recinto de Rio Piedras Facultad Administración de Empresas Departamento de Gerencia Caso Southern Cabinet Company Bill y Mike Norris 26 de noviembre de 2012 Introducción El propósito de este trabajo es evaluar la compañía de Bill, Southern Cabinet Company, para determinar estrategias que mejoren la empresa en la actual difícil situación económica y competencia en la industria. Las mismas estarán basadas en las predicciones del futuro sobre la industria, análisis del macro ambiente y microambiente, y las debilidades y fortalezas que posee la corporación. La unidad de negocios que será evaluada en este trabajo es la venta de gabinetes. Para realizar el análisis de este caso, primero debemos conocer el trasfondo de Bill Martin, el presidente de la compañía. Bill obtuvo su grado de escuela superior y en 1956 fundo la compañía de Southern Cabinet. Al comienzo Bill era el único empleado que había pero ya para el 1984 tenia a 38 personas trabajando con el. La compañía se estableció en una gran área metropolitana llamada Sunbelt. Para concluir el caso, se suministrarán recomendaciones acerca de las estrategias y del análisis realizado para superar las dificultades que atraviesa esta industria. De esta forma, la gerencia puede hacer prosperar el negocio por medio a la ventaja competitiva y crecimiento en potenciales consumidores. Objetivo principal El objetivo principal es determinar las estrategias necesarias para lograr el......

Words: 1885 - Pages: 8

Pm Speech

...time. As I have stated earlier also, rapid economic growth is an imperative for our country. Without it, we cannot possibly achieve targets such as removal of poverty, provision of good quality education and health services and creation of new employment opportunities. The average rate of economic growth that we have attained in the last 9 years shows what we are capable of. However, economic growth has slowed down at present and we are working hard to remedy the situation. We have recently taken many steps to speed up the process of government clearances for industry, build an environment more conducive to trade and industry and increase investment in the economy. A special Cell has been set up to help big projects with clearances. The Cabinet Committee on Investment is working to remove hindrances in the way of stalled projects. Inadequate supply of coal had become a major problem affecting our efforts for increasing electricity generation. This has been resolved to a large extent. We will start work on a number of new infrastructure projects in the coming months. This includes 2 new ports, 8 new airports, new industrial corridors and Rail projects. To boost Foreign Direct Investment, we have recently enhanced the limit of such investment in many sectors and made its easier procedurally. In the coming months, we will see visible results of these efforts to increase investment. Our growth will accelerate, new employment opportunities will be generated and there will be......

Words: 2966 - Pages: 12

Is Cabinet Government Dead?

...Is cabinet government dead? The cabinet is a ministerial group of the government that deals with certain areas in the country and abroad, There are 22 paid members of the cabinet that deal with many areas, the top man is David Cameron who is the Prime minister and the “First among equals” and because our current government is a coalition we have a deputy PM who is Nick Clegg, David Cameron picks the cabinet and they are not elected into cabinet but still hold onto their constituency, Cameron must pick his cabinet to benefit him and his country, if he places someone in cabinet who is very popular they may then challenge for leadership of the party, but cabinet is always the same, some prime ministers use it differently, like Thatcher and Blair, but is cabinet government dead? In 1979 a new prime minister was entering the government, this person was a lady called Margaret Thatcher, she is said to be the “Iron lady” and a woman that dominated her cabinet, she was knows as a prime minister that ignored her cabinet a lot of time as she was more of a presidential figure in government, but this could of all been different in her cabinet, during the start of her premiership in office she was a weak prime minister and her cabinet was very powerful, she needed something that would allow her to have power in her own government and for the rest of her terms in office, the first factor that helped her was the Iranian Embassy siege, which involved SAS members rescuing hostages in the......

Words: 1226 - Pages: 5

How Poweful Is the Pm?

...The PM is the most powerful person within the British political system, so believe he is now more powerful than ever due to his increased use of royal prerogative powers. The PM is powerful because he is head of the cabinet, including individual ministers and departments. But as important The PM is powerful in the sense that he was the ability to appoint cabinet ministers, dismiss them, promote and demote all ministers in government. He can select around 100 politicians from Commons and the Lords but can demote ministers in government such as Secretaries of States. The PM elects ministers who strongly support his ideologies or support his policies are appointed to respectable positions, whilst inner party opposition peers are selected to junior ministerial roles. These ‘opposition peers’ are often members of factions, in the Conservatives case that could be the “1922 Committee”. The PM can therefore influence their political careers and if careless actions occur this can lead to the end of that career. In October 2013, David Cameron had a cabinet reshuffle and of junior ministerial roles. For example, Baroness Warsi left the role as Tory Party co-chairman and was replaced by Grant Shapps. Andrew Langsley, a well-known MP who was part of the expenses scandal moved to lower profile roles. This would have been done in order to protect the reputation of him, as he wouldn’t want the electorate to think that troublesome/careless ministers still had a large influence in cabinet.......

Words: 1448 - Pages: 6

Pm Revision.

...PM Revision. Section B Chapter 1: Project life cycle. There are four stages in the Project Life Cycle. 1. Defining stage. 2. Planning stage. 3. Executing stage. 4. Closing stage. Chapter 4: Draw the WBS. * Defining the Project * There are five steps: Step 1: Defining the Project Scope * Project Scope Checklist 1. Project objective 2. Deliverables 3. Milestones 4. Technical requirements 5. Limits and exclusions 6. Reviews with customer Step 2: Establishing Project Priorities Step 3: Creating the Work Breakdown Structure Step 4: Integrating the WBS with the Organization Step 5: Coding the WBS for the information system Chapter 5: Factors influencing the Quality of Estimation. Quality of Estimates 1. Planning Horizon 2. Project Duration 3. People 4. Project Structure and Organization 5. Padding Estimates 6. Organization Culture 7. Other (Non-project) Factors Chapter 6: How to draw Network diagram & Gantt chart * Draw Network diagram. ( See 162, 163, 166, 169, and 170 in textbook) * Gantt chart. ( See 175, and 176 in textbook) Chapter 9: Ways can reduce project duration. Reducing Project Duration to Reduce Project Cost * Identifying direct costs to reduce project time * Gather information about direct and indirect costs of specific project durations. * Search critical activities for lowest direct-cost activities to shorten project duration. *......

Words: 1204 - Pages: 5

Pm 143

...the leader in workflow consulting”. Beck needs a strategy to get Beck where they want it to go in the future. Beck has to let all employees know the strategy. How can the employees help the company grow if they don’t know what is going on? Beck can be as good or bad as they want it to be. Its just the matter of communicating things so that people feel that they are apart of something instead of a tool to be used. -------------------------------------------- [ 1 ]. Reference Item B, p. 27. Ian Palmer, Richard Danford, Gib Akin. (2005). Managing Organizational Change: McGraw-Hill Irwin. [ 2 ]. Item 1 By Amanda Cantrell, CNNMoney.com staff writer March 29, 2006: 6:34 PM EST http://money.cnn.com/2006/03/29/technology/apple_anniversary/?cnn=yes [ 3 ]. Item 2 August 12, 2010, 12:32 pm Hyundai Is ‘On a Roll’ With Car BuyersBy CHERYL JENSEN http://wheels.blogs.nytimes.com/2010/08/12/hyundai-is-on-a-roll-with-car-buyers/ [ 4 ]. Item B, p. 151 Ian Palmer, Richard Danford, Gib Akin. (2005). Managing Organizational Change: McGraw-Hill Irwin. [ 5 ]. Item B, p. 126 Ian Palmer, Richard Danford, Gib Akin. (2005). Managing Organizational Change: McGraw-Hill Irwin. [ 6 ]. Item B, p. 151 Ian Palmer, Richard Danford, Gib Akin. (2005). Managing Organizational Change: McGraw-Hill Irwin....

Words: 2785 - Pages: 12

Pm Information

...Kindly answer the following questions, posting your answers to your assignments folder.  Include your name within your file, which per our syllabus, should be in pdf format. This LRE, as with all LREs in the course, was developed and will be assessed by our AMBA 640 / AMBA 640 Hybrid Teaching Assistants: Christine Bailey, Bryan Berthot, Mike Blanford, Darrell Bratton, Gina DiMaggio, Phillip Foust, Ross Kooiman, Bob Neumeister, Manny Singh, and Richard Wagner.    1. Your PM experience: a. I have prior experience in project management. Yes/No b. I have used PM software. Yes/No 2. The Triple Constraint in PM refers to meeting simultaneously the requirements of time, cost and __Scope_________. 3. After installing MS-Project (MSP) 2010 or 2013 (preferred because newer) (trial version found at microsoft.com, full version available via the UMUC-Microsoft Alliance "Dreamspark"), download and open the file,  “LRE1_MPP_MS_Project_Renovation_Example.mpp” at mpp file, to answer the following questions: a. When is this project expected to end? b. What and when is the second milestone? c. What are the last two tasks on the project critical path? 4. Using the following table of tasks, a. Build using MSP an mpp file including a work breakdown structure and a Gantt chart showing the project critical path. b. What does the critical path become if Task C takes three time units?   Task | Predecessor(s) | Time units required | A | None | 1 | B | A | 2 | C...

Words: 272 - Pages: 2

Pm Adaptive

...I would recommend Adaptive project management methodology. The two aspects that make this method appropriate for the potential clients are; “Iterative decision-making or making choices based on learning from the outcomes of decisions previously taken and strategic flexibility or avoidance of irreversible decisions” (Virine, 2008). Adaptive PM will enable the organization to follow a structured PM system but will also provide the ability to change according to the organizations strategic plans and ongoing decision-making process. The organization is withholding the nature of the project; this would guide the project management to a structure that will be supportive the strategic impact, ability to refine the project based on needs, and lessons learned, and flexibility required for this project and the organization. Project management uses different methods to structure the project plan. Project management methodology allow the project manager and the organization to understand and see the project roadmap, milestones, timeline, risks, and manage desired outcome. Some of the methodologies utilized in project management are adaptive, Crystal Methods, Waterfall, and lean. As an example, the Waterfall method would not fit the potential client as its model does not allow change; it is fixed to methods, timelines and specified tasks (Tutorials Point). When analyzing which method is appropriate for the project, the desired outcome and strategic objects need to be clearly......

Words: 373 - Pages: 2

Pm Skills

...context of the organisation and how it operates. the PM would have to have a good understanding of the environment in which they are working and the signifigance of events and peoples actions. 3. Briefly explain the differences between functional, matrix and project organisations. Describe how each structure affects the management of the project. Functional organisations are departmentalised into functional areas of common knowledge. A projectised organisation arranges their staff into project teams of various the various skills required to complete projects. Projects are the main output of project organisations such as a construction company. A matrix organisation has a combination of both functional structure and project teams where an individula employee may have 2 managers simaltaneously, say there functional line manager and a Project manager for a project team they are a member of. For example a management Accountant will have a CFO as their functional manager but during ERP implentation they may also report to the project manager in charge of the ERP implementation. The different organisations refelect the different power or infuence a project manager may have. In a functional organisation a PM would have very little or none, within a matrix org they would have more but not total since there would be dotted line reporting to the PM and a more direct report to a functional manager. In a project centric org, the PM would be the the full direct line report to all......

Words: 4586 - Pages: 19

Tools for Pm

...Despite this enormous interest in projects and project management practices, success rates in many industries are at alarmingly low levels. In addition, bad news about high-profile projects continues to dominate the headlines – in both the public and private sectors (Venkataraman & Pinto, 2008). A lot of this bad news comes from the PM (Project Manager) not being educated on all the tools at his/her disposal to be better prepared to prevent the project from failing. In order for anything to succeed, it must have a strong foundation and the foundation for project management to succeed the PM should start with a WBS (Work Breakdown Structure). The work breakdown structure is said to be (if not the most important) one of the most important tools a project manager should possess. The WBS provides the basic processes needed in order to start the project such as the development of the schedule, budgeting, cost control, resource distribution, earned value analysis (EVA), and a host of other aspects available to PM to ensure the project starts out on the right track. The WBS is a hierarchy diagram of all the project activities in ordered to give the PM a visual of what should be completed and at what time frame it should be completed in. An example of using a WBS correctly would be building a installing a playground set for a school. The first thing listed on the work breakdown structure would be the project’s name and because installing a playground can have so many......

Words: 1692 - Pages: 7

Pm Project

...activity List 4. PLM calls PD, CM’s, MEP coordinator and related personnel on a series of meetings for confirmation of activity list 5. PLM prepares the draft of partial network diagram a. b. c. d. e. Page 16 of 61 Project Management ENGG 951 Final Project a. b. c. d. e. f. g. 6. PLM calls PD, CM’s... etc. for series of meetings for confirmation of partial network diagram. 7. Resources are estimated for each Activity 8. CM and MEP coordinator confirm the duration of each activity on the diagram based on the realistic productivity of the labor and the crew size 9. PLM reviews the required resources and duration of activities prepared by the CM’s and MEP coordinator 10. PLM reports the results of review to the project manager(PM) and PD and get the confirmation 11. PLM input those data into the primavera software 12. PLM generates the following reports and plots: Project S-curve Critical path Summarized report by item Summarized report by sub-contractor Required manpower report Required material report Cash flow forecasting report 13. Series of meeting between all related personnel is conducted to finalize the project baseline schedule 14. PLM submits the baseline schedule to the PD for approval Page 17 of 61 Project Management ENGG 951 Final Project 5. Quality Management Plan: This Quality Management Plan establishes basic requirements for the quality management system which is applicable to Commodore Contracting Company. The scope of The Company......

Words: 9927 - Pages: 40

To What Extent Does the Prime Minister Control the Cabinet?

...way in which the prime minister controls cabinet varies, and can vary greatly, as Prime ministers have great amounts of scope in which they can manage and control the cabinet and the system surrounding it. The main reasons for the control the Prime Minister has over Cabinet are due to the powers he/she has over the Cabinet itself. The first is that the Prime Minister chairs cabinet meetings, and manages the agendas, as well as summing up the decisions at the end. This means that the PM has a great deal of control over the meetings, and can direct them in a course that suits what the PM wants. Combine this with the fact that the Prime Minister convenes cabinet meetings and decides when they are called and sets their length – it means that in effect, the PM determines the role and significance of the entire cabinet. Cabinet meetings have declined over the past decades, from around 100 a year to only 40, under Blair they rarely lasted more than an hour, which, when taking into consideration the size of Cabinet and the sheer amount of issues that are discussed, indicates that Blair put little importance on Cabinet meetings. Brown has changed things so that they last longer, but not by a great deal. They are now places where discussion isn’t encouraged and dissent not tolerated, and many of the decisions made there have in fact already been approved of, but merely require formal approval. Thatcher, at first, manipulated the Cabinet to great effect for her cause. She......

Words: 562 - Pages: 3

Cabinet of Japan

...Powers 3.1 Powers exercised via the Emperor 3.2 Explicit powers 4. Current Cabinet of Japan 5. References 1. Introduction The Cabinet of Japan is the executive branch of the government of Japan. It consists of the Prime Minister, who is appointed by the Emperor after being designated by the National Diet, and up to nineteen other members, called Ministers of State. The Prime Minister is designated by the Diet, and the remaining ministers are appointed and dismissed by the Prime Minister. The Cabinet is collectively responsible to the Diet and must resign if a motion of no confidence is adopted by the Diet. The modern Cabinet was established in December 1885. It replaced the Daijō-kan, the imperial administration since the Nara period, that had been reactivated after the Meiji restoration as its modernized variation. Under the Meiji Constitution, the Prime Minister and the cabinet were appointed by and responsible to the Emperor. Since the Constitution of Japan came into effect in 1947, the cabinet was reformed, with the Prime Minister being elected by the Diet and the cabinet being responsible to the Diet. 2. Appointment Under the constitution, Cabinet ministers are appointed after the selection of the Prime Minister. A majority of the Cabinet, including the Prime Minister, must be members of the Diet, and all members must be civilians. Under the Cabinet Law, the number of Cabinet Ministers (excluding the Prime Minister) must be fourteen or less, but this......

Words: 1209 - Pages: 5

Pm 598

...for residential building projects. Used blueprints and wiring diagrams to affect safe and correct work. Installed interior and exterior wiring. Tested voltage, resistance and phase angle in circuits to ensure safety. Operated a variety of tools including power saws, saw zaws, power drills, planers, jointers, and routers. Custom tile installation for bathroom, kitchen backsplash and fireplaces, ceramic tiles, and natural stone: marble, slate, travertine and query tile. XYZ Corp. April 2006 – Mar 2007 Carpenter Any Town, IL Tearing out and replace cabinets and carpet. Replace rotten sub flooring, lighting, and sinks, plumbing and electric. Installation Sheet rock and appliances. Hang interior doors Rout, hinge, shoe molding, caulking, install. BCD Inc. July 2005 – Feb 2006 Lead Carpenter Any Town, IL Residential home additions from start to finish. Replace and Install exterior windows and doors. Interior trim. Cabinet Installation. Building Decks. Install Exterior siding. Sheetrock repairs. Education New York High School June 1995 High School Carpentry Vocational Professional Education June 1997 Other Carpentry and Masonry 1 & 2 SPECIAL TRAINING 1999-2001 Carpenter Training, A1 Institute, New York Construction specialist Woodrow Zellner 2528 Cooks Mine Road Espanola, NM 87532 (111)-362-8858 woodrow_zellner@xymail.com Skills: • Strong familiarity with measuring equipments • Solid background in shaft and tunnel excavations • Experienced in......

Words: 3635 - Pages: 15

PC – Guerra | IMDb: 4 S1E1 The Conners - Season 1 | L Illusionniste